Magicscreen Tempered Glass iPhone X Pre-order
How to apply magicscreen
Magicscreen Tempered Glass Screen protector with installation frame for iPhone X
Before you begin, first view our application tutorial video.
- Clean your device screen thoroughly, using the wet non-abrasive cleaning pad (packet '1') and then the lint-free drying pad (packet '2').
- Install the alignment frame by placing it on top of your phone and then pushing downwards until it is securely fixed.
- Use the dust removal stickers to remove any remaining dust particles.
- Pull the 'no. 1' sticker tab downards to peel away the first disposable film layer from the screen protector and expose its adhesive underside.
- Holding the two positioning tabs of the second (and final) disposable layer, carefully lower the protector onto the screen of your device. It is important that it be completely level when applied, with the entire protector making contact with the screen at the same time.
- Press the centre of the protector with one finger, and allow the rest of the protector to adhere itself to the screen, as shown in the video. If any air bubbles appear, smooth them out by rubbing firmly with your finger. Peel off the second disposable layer to complete the application.
Allow 1-2 days for any stubborn small air bubbles remaining to disappear. Rub the screen every few hours to speed this up. Dust bubbles will be minimised using this method, but will never completely disappear.
Please note: This glass protector is anti-shatter. If dropped with enough force, it will crack, but will not shatter into fragments and will still be safe to use. The tempered glass absorbs shock, protecting the screen of your device from damage.
Before you begin, first view our application tutorial video.
- Clean your device screen thoroughly, using the wet non-abrasive cleaning pad (packet '1') and then the lint-free drying pad (packet '2').
- Install the alignment frame by placing it on top of your phone and then pushing downwards until it is securely fixed.
- Use the dust removal stickers to remove any remaining dust particles.
- Pull the 'no. 1' sticker tab downards to peel away the first disposable film layer from the screen protector and expose its adhesive underside.
- Holding the two positioning tabs of the second (and final) disposable layer, carefully lower the protector onto the screen of your device. It is important that it be completely level when applied, with the entire protector making contact with the screen at the same time.
- Press the centre of the protector with one finger, and allow the rest of the protector to adhere itself to the screen, as shown in the video. If any air bubbles appear, smooth them out by rubbing firmly with your finger. Peel off the second disposable layer to complete the application.
Allow 1-2 days for any stubborn small air bubbles remaining to disappear. Rub the screen every few hours to speed this up. Dust bubbles will be minimised using this method, but will never completely disappear.
Please note: This glass protector is anti-shatter. If dropped with enough force, it will crack, but will not shatter into fragments and will still be safe to use. The tempered glass absorbs shock, protecting the screen of your device from damage.